VTC-700C high‑speed drilling tapping center with FANUC 0i‑MF Plus, 20000rpm BT30 direct‑drive spindle, 48m/min rapid traverse, 21‑tool magazine, for 3C, aluminum housing mass‑production milling & tapping.
Technical Specification
| project |
unit |
VTC-700C |
| X/Y/Z axis travel |
mm |
700 / 400 / 330 |
| Distance from spindle nose to worktable surface |
mm |
130-460 |
| Distance from spindle center to column guide surface |
mm |
462 |
| spindle nose taper |
|
BT30 |
| rivets |
|
45 ° |
| Spindle motor power (rated/overload) |
kw |
3.7-5.5 |
| Spindle motor torque (rated/overload) |
Nm |
11.8-28.7 |
| maximum spindle speed |
rpm |
20000 |
| Tool magazine type |
|
Clamp arm type |
| Number of cutting tools |
pcs |
twenty one |
| Maximum tool diameter / adjacent toolless |
m m |
100/140 |
| Maximum tool length |
mm |
250 |
| Maximum tool weight |
Kg |
3 |
| Tool change time (adjacent/far) |
sec |
0.35/1.3 |
| X/Y/Z axis motor rated power |
K w |
2.5/2.5 / 2.7 |
| X/Y/Z axis motor rated torque |
Nm |
8.0/8.0/12.0 |
| workbench area |
mm |
800 * 420 |
| T-slot |
mm |
3-14 * 125 |
| Maximum load of the workbench |
K g |
300 |
| X-axis rapid displacement |
m/min |
48 |
| Y-axis rapid displacement |
m/min |
48 |
| Z-axis rapid displacement |
m/min |
48 |
| Cutting feed rate |
mm/min |
1 - 10000 |
| Positioning accuracy |
mm |
0.005/0.005/0.005 |
| Repeatability |
mm |
0.003/0.003/0.003 |
| controller |
FANUC |
Oi MF Plus |
| Machine weight |
K g |
4000 |
| Power requirements |
KVA |
20 |
| Water tank capacity |
L |
200 |
| air compressor source |
kg/cm 2 |
6.0 |
| Mechanical height |
mm |
2200 |
| Area |
mm |
1900 * 2320 |
Standard Equipment List
1.Japanese FANUC 0i MF Plus controller (10.4")
2.Five-axis four-linkage function enabled
3.High-speed, high-precision AICC1
4.Automatic tool magazine reset
5.Processing mode selection
6.System energy saving mode
7.Customize the screen
8.Full-face shield
9.Post-flushing debris removal
10.Automatic lubrication system
11.Anchor bolts and washers
12.Toolbox
13.Warning lights and illumination lights
14.Handheld air gun/ water gun
15.Iron scrap pan and water tank
16.Transformer
17.Mechanical, electrical, and operating instructions
18.Rigid tapping
19.BT30 direct-drive spindle 20000rpm
20.BT30-21T Clamp Arm Tool Magazine
21.Spindle air curtain dust prevention system (customer needs to provide a dry and clean air source)
22.Spindle oil cooler
